DRAMM Autofog Medium W / Stainless Steel Nozzle
Press and move to zoom.
Mouse over image to zoom.

DRAMM Autofog Medium W / Stainless Steel Nozzle

Product Code:173310

The Dramm Autofog is an air assisted, micro particle generator for applying chemicals in enclosed areas. Using the Ultra Low Volume principle, the Autofog creates billions of tiny particles (5μ average diameter) which completely fill the entire treatment area and evenly cover all surfaces. These particles are delivered to the plant, insect, or surface by the air current created by the Autofog's fan, ensuring even coverage throughout the greenhouse. Because of their extremely small size, these particles eliminate costly run off, unsightly residues and damaging burn.

The Dramm Autofog can treat between 12,000 and 70,000 sq ft automatically, without an operator, saving in labor costs and health risks. Simply move the Autofog to the desired location, mix your chemical, set your timers and leave. The Autofog will start automatically at the time you desire, precirculate the air, apply the chemical and shut itself off. After the appropriate REI has passed, ventilate the greenhouse and remove the machine.

The Autofog uses a surgical, oilless compressor to protect against leakage of machine oil into the treatment area. The chemical tank has a conical centerpiece in the bottom of the tank. The special design prevents the chemical, especially wettable powders, from accumulating in the center of the tank while agitation is taking place. This ensures homogeneous solution at all times. All components of the Autofog are made from corrosion resistant material, ensuring a long, reliable life. Clean up is easy and maintenance is simple.

The Dramm Autofog comes complete with Graduated Cylinder for accurate chemical measurement and nozzle calibration, compressor assembly and fogger head, and is ready to use. The manual describes its operation and the principles involved. The machine is backed by a 6 month warranty on parts and labor.

Specifications:
  • Standard coverage area: Up to 12,000 sq.ft.
  • Coverage with HAF fans: Up to 28,000 sq.ft.
  • Nozzle type: Air atomizing
  • Standard control system: 2- 24hr quartz autostart timers
  • Power: 120V, 60 Hz single phase
  • Chemical tank volume: 7 L
  • Chemical Output rate: 45cc/min
  • System rated load: 11.1 amp
  • Compressor HP: 3/4
  • Compressor type: Oilless capacitor start brushless
  • Compressor output rate: 2.43 CFM @ 21 psi
  • Hose & cord length: 33 ft
  • Dimensions: 18.25" wide
  • Shipping weight: 156 lbs

Instruction Manual